User manual

3 SNMP-1000-B2 User Manual
Chapter 1 Introduction
1.2 Specifications
1.2.1 Hardware Specifications
 20 MHz 80188-compatible CPU
 512KB of Flash ROM and 512KB of SRAM
 One 10/100 Mbps onboard Ethernet adapter
 One RS-232 serial port with a 9600 baud rate
 One SM bus interface for PC system healthy status monitoring
 One SM bus interface for up to eight external temperature sensors
 Nine fan tachometer inputs (seven for SNMP-1000-E2B2)
 One onboard temperature sensor
 One LCM message display interface
 System watchdog time-out signal detector
 Four good power signals (one for SNMP-1000-E2B2)
 Eight digital inputs (SNMP-1000-E1B2 only)
 Four digital outputs (one for SNMP-1000-E2B2)
 Buzzer support
1.2.2 Dimensions
 Kernel module: 40.5 x 93 mm
 PCI/ISA carrier module: 175 x 107 mm
 Chassis carrier board: 55 x 115 mm
1.2.3 Sensor Input Specifications
 Voltage inputs: +5 V DC, -5 V DC, 5 V SB, +3.3 V DC, +12 V DC, -12 V DC
 Temperature sensors: LM75 digital temperature sensor, I2C interface, -30 ~
125 °C (-22 ~ 257 °F)
 Fan speed monitor:
Up to nine fans, 700 ~ 10000 RPM
Power good/Digital input:
High: > 2.4 V
DC
Low: < 0.8 V
DC
1.2.4 Firmware Specifications
System Status Monitoring and Management
 Real-time health status monitoring; provides a real-time status display in HTTP
Java graphical format
 Supports history log graphical display and data downloads
 Alarm event log
Alarm Notification
 Supports up to four e-mail addresses
 Alarm messages can be transmitted to optional LCD display modules
 SNMP trap: can notify up to eight SNMP administrators
 Pager notification: can send messages to up to eight pagers via an external
modem
 Audible alarm sound
Supported Protocols
 TCP, UDP, IP, ICMP, DHCP, BOOTP, ARP, SNMP, HTTP, and Telnet