Specifications

Chapter 3 Award BIOS Setup 47
You can choose “Delay 4 sec.” If you do, then pushing the button for
more than 4 seconds will turn off the system, whereas pushing the
button momentarily (for less than 4 seconds) will switch the system
to “suspend” mode.
3.7.4 PowerOn By LAN
This item allows you to wake up the system via LAN from the remote
host. The choices: Enabled, Disabled.
3.7.5 PowerOn By Modem
When Enabled, an input signal on the serial Ring Indicator (RI) line
(in other words, an incoming call on the modem) awakens the system
from a soft off state. The choices: Enabled, Disabled.
3.7.6 PowerOn By Alarm
When Enabled, your can set the date and time at which the RTC (real-
time clock) alarm awakens the system from Suspend mode. The
choices: Enabled, Disabled.
3.7.8 CPU Thermal-Throttling
This field allows you to select the CPU THRM-Throttling rate. The
choices: 12.5%, 25.0%, 37.5%, 50.0%, 62.5%, 75.0%, 87.5%.
3.7.9 PWRON AfterPWR-FAIL
This field lets you to determine the state that your computer returns
after a power failure. If sets to Off, the PC will not boot after a power
failure. If sets to On, the PC will restart after a power failure. If sets to
Auto, the PC will go back to the previous state before a power failure
occurred. For instance, if the PC is power-on when power system fails,
the PC will restart when power system is working again. If the PC is
power-ff when power system fails, the PC will not boot when power
system is working again. The Choice: Off, On, Auto.