Specifications

Chapter 9 SCSI Setup and Configurations 111
Press <Ctrl><A> for SCSISelect (TM) Utility!
3. From the menu that appears, use the arrow keys to move the
cursor to the option you want to select, then press Enter.
Note: If you have difficulty viewing the display, press F5
to toggle between color and monochrome modes.
(This feature may not work on some monitors.)
Exiting SCSI Select
Follow these steps to exit SCSISelect:
1. Press Esc until a message prompts you to exit (if you changed
any settings, you are prompted to save the changes before you
exit).
2. At the prompt, select Yes to exit, then press any key to reboot the
computer. Any changes you made in SCSISelect take effect after
the computer boots.
9.6 Using SCSI Select Settings
To select an option, use the arrow keys to move the cursor to the
option, then press Enter.
In some cases, selecting an option displays another menu. You can
return to the previous menu at any time by pressing Esc.
To restore the original SCSISelect default values, press F6 from the
main SCSISelect screen.
SCSI Bus Interface Definitions
• Host Adapter SCSI ID—(Default: 7) Sets the SCSI ID for the
SCSI card. The Adaptec SCSI Card 29160 is set at 7, which gives it
the highest priority on the SCSI bus. We recommend that you do
not change this setting.
• SCSI Parity Checking—(Default: Enabled) When set to En-
abled, verifies the accuracy of data transfer on the SCSI bus. Leave