Specifications

Chapter 3 Award BIOS Setup 43
3.6.3 USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have USB peripherals. The choices: Enabled,
Disabled.
3.6.4 USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB)
controller and you have a USB keyboard. The choices: Enabled,
Disabled.
3.6.5 Init Display First
This item allows you to choose which one to activate first, PCI Slot
or on-chip VGA. The choices: PCI Slot, Onboard.
3.6.6 IDE HDD Block Mode
You can enable the Primary IDE channel and/or the Secondary IDE
channel. Any channel not enabled is disabled. This field is for
systems with only SCSI drives.
3.6.7 Onboard FDC Controller
When enabled, this field allows you to connect your floppy disk
drives to the onboard floppy disk drive connector instead of a
separate controller card. If you want to use a different controller card
to connect the floppy disk drives, set this field to Disabled.
3.6.8 Onboard Serial Port 1 (3F8H/IRQ4)
The settings are 3F8H/IRQ4, 2F8H/IRQ3, 3E8H/IRQ4, 2E8H/
IRQ10, and Disabled for the on-board serial connector.
3.6.9 Onboard Serial Port 2 (2F8H/IRQ3)
The settings are 3F8H/IRQ4, 2F8H/IRQ3, 3E8H/IRQ4, 2E8H/
IRQ10, and Disabled for the on-board serial connector.