User`s manual

PCA-6187 User’s Manual 42
When Enabled, the system will resume from suspend mode if interrupt
occurs. The choice: "Enabled", "Disabled".
3.9 PnP/PCI Configurations
3.9.1 Reset Configuration Data
Default is Disable. Select Enable to reset Extended System Configuration
Data (ESCD) if you have installed a new add-on and system configura-
tion has caused such a conflict that OS cannot boot.
3.9.2 Resources Controlled By
The commands here are "Auto(ESCD)" or “Manual.” Choosing “manual”
requires you to choose resources from each following sub-menu.
"Auto(ESCD)" automatically configures all of the boot and Plug and Play
devices but you must be using Windows 95 or above.
3.9.3 PCI/VGA Palette Snoop
This is left at “Disabled.”
3.10 PC Health Status
3.10.1 CPU Warning Temperature
Figure 3.10: PnP/PCI configurations screen