User`s manual

Chapter 1 Introduction 3
Note: To use the keyboard and keypad
simultaneously, you must first connect the
keyboard connector on the backplane to the
keyboard connector on the CPU card, and then
connect the external keyboard jack to another
keyboard jack located next to the power supply.
If you connect the keyboard to the 5-pin DIN
connector on the CPU card, neither the
keyboard nor the keypad will work. The
keyboard must be connected to the jack behind
the front door.
Accessible and secure control panel
We have put all the workstation's controls at the front of the
unit for easy access. A door protects the controls from damage.
External controls are: power ON/OFF and reset switches, slim
floppy disk drive, slim CD-ROM drive and external KB port.
Two LEDs indicate power ON and HDD status. There is a
control to adjust the brightness or contrast of the LCD display.