User`s manual

Chapter 2 System Setup 15
2.3 Adding Cards
The PCI passive backplane accepts both PCI-bus and ISA-bus
CPU and I/O cards. We recommend all-in-one cards. They are
durable, and save valuable slot space by bundling a CPU card with
hard disk and floppy disk controllers, as well as serial and parallel
ports.
Open the top panel (see Section 2.2) and then slowly slide the card
in and carefully press it into the backplane socket. Secure it with a
screw to the top mounting bar. (See Fig. 2-3). Connect the wires.
Install additional cards as needed. When you have finished,
reattach the cover.
Figure 2-3: Installing add-on cards