User`s manual

AWS-842TPB/SPB User's Manual

<COM port> is:

the number of the COM port where the serial output of the

touchscreen controller is connected.

matches the switch or jumper settings on the controller.

Example MonitorMouse for OS/2 DEVICE command:

Device=c:\elo\monmou01.sys 2210,1,9600

No Mouse

If you do not wish to have a mouse connected, change the

“stype=elomou$” flag to “type=elomou$” on the

DEVICE=MOUSE.SYS command.

Disabling the COM Drivers

If your system COM ports are being used by the touchscreen and

mouse, REM out the DEVICE=COM.SYS and DEVICE=VCOM.SYS

commands (if present) in CONFIG.SYS. This prevents the COM

drivers from displaying amessage saying the COM port is unavailable.

If only the touchscreen is using a COM port, move the

DEVICE=COM.SYS and DEVICE=VCOM.SYS commands before

the DEVICE=MONMOU02.SYS command in CONFIG.SYS. Then

add the flag (<COM Port>,0,0) to COM.SYS, where <COM Port> is

the same as on the DEVICE=MONMOU01.SYS command. For

example:

Device=c:\os2\com.sys (1,0,0)