Specifications

40 PCA-6003 User’s Manual
3.5.16 AGP Master 1 WS Write
When Enabled, writes to the AGP(Accelerated Graphics Port) are
executed with one wait states. The choice: Enabled, Disabled
3.5.17 Memory Parity/ ECC Check
Enabled add a parity check to the boot-up memory test. Select
Enabled when only system DRAM contains parity. The Choice:
Enable, Disable.
3.6 Integrated Peripherals
Figure 3-5: Integrated peripherals
3.6.1 On-Chip Primary/Secondary PCI IDE
If you enable IDE HDD Block Mode, the enhanced IDE driver will be
enabled. Leave IDE HDD Block Mode on the default setting.
3.6.2 IDE Primary Master/Slave PIO/UDMA Mode,
IDE Secondary Master/Slave PIO/UDMA Mode (Auto)
Each channel (Primary and Secondary) has both a master and a slave,
making four IDE devices possible. Because each IDE device may have
a different Mode timing (0, 1, 2, 3, 4), it is necessary for these to be
independent. The default setting “Auto” will allow autodetection to
ensure optimal performance.