User manual

PCE-5124 User Manual 54
3.4 PCI/PNP Setup
Select the PCI/PnP tab from the PCE-5124 setup screen to enter the Plug
and Play BIOS Setup screen. You can display a Plug and Play BIOS
Setup option by highlighting it using the <Arrow> keys. All Plug and
Play BIOS Setup options are described in this section. The Plug and Play
BIOS Setup screen is shown below.
Figure 3.11: PCI/PNP setup
3.4.1 Clear NVRAM
Set this value to force the BIOS to clear the Non-Volatile Random Access
Memory (NVRAM). The Optimal and Fail-Safe default setting is No.
3.4.2 Plug and play O/S
Set this value to allow the system to modify the settings for Plug and Play
operating system support. The Optimal and Fail-Safe default setting is
No.