User manual

PCE-7210 User Manual 94
9.4 IPMI OEM command lists
In addition to the above list of IPMI commands, the following OEM com-
mands will be supported.
Table 9.2: OEM Commands list
Net Function = 0x2E, LUN = 0
Code Command Request, Response Data Description
05h Set System
GUID
Request:
Byte 1:16 – System GUID
Response:
Byte 1 — Completion code.
This command is
used to set the
system GUID.
The GUID can be
retrieved using a
standard IPMI
command.
0Dh Reset to
Defaults
Request:
Reset module ID
Byte 1[7:0]
1 = OEM module
2 = LAN module
3 = User Info module
4 = Serial module
5 = SOL module
6 = PEF module
7 = Firewall module
8 = System Information
0xFF = all modules
Byte 2:4
Reserved.
Response:
Byte 1
Status of Reset to Default. If fail,
this value indicate the last fail
module and the reset process
stops.
[7:0]
0 = success
1 = fail in OEM module
2 = fail in LAN module
3 = fail in User Info module
4 = fail in Serial module
5 = fail in SOL module
6 = fail in PEF module
7 = fail in Firewall module
8 = fail in System Information
This command
resets the BMC
configuration to
default values.