User manual

Data Acquisition Boards
Features
PCIE-1760
Specifications
Isolated Digital Input
 Channels 8
 Input Voltage Logic 0: 1.0 V max.
Logic 1: 4.5 V min. (12 V max.)
 Interrupt Capable Ch. 8
 Isolation Protection 2,500 V
DC
 Opto-Isolator Response 25 µs
 Input Resistance 2 k: 1/4 W
Counter/Timer
 Channels 8
 Resolution 16 bits
 Compatibility 5 V/TTL
 Max. Input Frequency 500 Hz
 Isolation Protection 2,500 V
DC
 PWM Channels 2
 Digital Noise Filter Min. effective high input period t [(2 ~ 65535) x 5 ms]
+ 5 ms
Min. effective low input period t [(2 ~ 65535) x 5 ms]
+ 5 ms
Relay Output
 Channels 8
 Relay Type 2 x Form C, and 6 x Form A
 Contact Rating 1 A @ 125 V
AC
, 2 A @ 30 V
DC
 Max. Switching Power 125 VA, 60 W
 Max. Switching Voltage 250 V
AC
, 220 V
DC
 Max. Switching Current 2 A
 Operate/Release Time 5 / 3.5 ms max
 Resistance Contact: 50 m: max.
Insulation: 100 M: min. @ 500 V
DC
 Life Expectancy 3 x 10
5
cycles min.: 2 A @ 30 V
DC
, 1 A @ 125 V
AC
(Electrical) 10
6
cycles min.: 1 A @ 30 V
DC
, 0.5 A @ 125 V
AC
 8 opto-isolated digital input channels with counter/timer function
 8 relay actuator output channels
 2 opto-isolated PWM outputs
 LED indicators to show activated relays
 Jumper selectable dry contact/wet contact input signals
 Up event counters for DI
 Programmable digital filter function for DI
 Pattern match interrupt function for DI
 "Change of state" interrupt function for DI
 BoardID switch
8-ch Relay and 8-ch Isolated Digital
Input PCI Express Card
General
 Bus Type PCI Express V1.0
 I/O Connectors 1 x DB37 female connector
 Dimensions (L x H) 168 x 100 mm (6.6" x 3.9")
 Power Consumption Typical: 5 V @ 450 mA
Max.: 5 V @ 850 mA
 Operating Temperature 0 ~ 60°C (32 ~ 140°F)
 Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
 Storage Humidity 5 ~ 95 % RH, non-condensing
Ordering Information
 PCIE-1760 8-ch Relay/IDI PCIe Card w/ 10-ch Counter/Timer
Accessories
 PCL-10137-1E DB37 Cable, 1 m
 PCL-10137-2E DB37 Cable, 2 m
 PCL-10137-3E DB37 Cable, 3 m
 ADAM-3937 DB37 DIN-rail Wiring Board
Introduction
PCIE-1760 relay actuator and isolated digital input card is a PC add-on card for the PCI Express bus. It meets the PCI Express standard Rev. 1.0. It provides 8 opto-isolated digital
inputs with isolation protection of 2,500 V
DC
for collecting digital inputs in noisy environments, 8 relay actuators that can be used as a on/off control devices or small power switches,
and 2 isolated PWM (Pulse Width Modulation) outputs for custom applications.
For easy monitoring, each relay is equipped with one red LED to show its on/off status. Each isolated input supports both dry contact and wet contact so that it can easily interface
with other devices when no voltage is present in the external circuit.
19-20