User manual
www.advantech.com/products
Online Download
Features
PCIE-1810
Specifications
Analog Input
  Channels  Single-ended  16-ch 
Differential   8-ch
  Resolution
12 bits
  Sample Rate  Single Channel 800 kS/s max.     
Multi-Channel 500 kS/s max. 
Note: The sampling rate for each channels will be affected by used channel number.
For example, if 4 channels of PCIE-1810 are used, the sampling rate is 500k/4 = 125 
kS/s per channel.
  Trigger Reference  Digital Trigger, 
Analog Trigger
  Trigger Mode  Start trigger, Delay to Start trigger 
Stop trigger, Delay to Stop trigger
  FIFO Size  4k samples
  Overvoltage Protection  30 Vp-p
  Input Impedance  1 G:
  Sampling Modes  Software and external clock
  Input Range  Software programmable
Gain 0.5 1 2 4 8
Bipolar ±10V ±5 ±2.5 ±1.25 ±0.625
Unipolar N/A 0 ~ 10 0 ~ 5 0 ~ 2.5 0 ~ 1.25
Absolute Accuracy (% of FSR)* 0.1 0.1 0.2 0.2 0.4
Analog Output
  Channels  2
  Resolution  12 bits
  Output Rate  500 kS/s max.
  Output Range  Software programmable
Internal Reference
Unipolar
0 ~ 5 V
0 ~ 10 V
Bipolar
 -5 V ~ 5 V
-10 V ~ 10 V
External Reference 0 ~ +x V @ -x V (-10 d x d 10)
  Slew Rate  20 V/µs
  Driving Capability  5 mA
  Operation Mode  Static update, Waveform generation
  Accuracy  INLE: ± 1 LSB, DNLE: ± 1 LSB
  16 analog inputs, up to 800 kS/s, 12-bit resolution
   2 analog outputs, up to 500 kS/s, 12-bit resolution 
  Support for digital trigger and analog trigger
  24 programmable digital I/O lines
  Two 32-bit programmable counter/timers
  Onboard FIFO memory (4k samples)
  Automatic channel/gain scanning
800 kS/s, 12-bit, 16-ch PCI Express 
Multifunction DAQ Card
Digital I/O
  Channels  24
  Compatibility  5 V/TTL
  Input Voltage  Logic 0: 0.8 V max. 
Logic 1: 2.0 V min.
  Output Voltage  Logic 0: 0.8 V max. 
Logic 1: 2.0 V min. 
  Output Capability  Sink: 15 mA @ 0.8 V 
Source: 15 mA @ 2.0 V
Counter
  Channels  2
  Resolution  32 bits
  Compatibility  5 V/TTL
  Max. Input Frequency  10 MHz
  Pulse Generation  Yes
  Timebase Stability  50 ppm
General
  Form factor  PCI Express x 1
  Triggering  12 bits Analog x 2 / Digital x 2
  I/O Connector  68-pin SCSI female connector
  Dimensions (L x W)  167 x 100 mm 
  Power Consumption  Typical: 3.3 V @ 488 mA 
   12 V @ 112 mA 
Max.:   3.3 V @ 2.25 A 
   12 V @ 390 mA
  Operating Temperature  0 ~ 60°C (32 ~ 140°F) (refer to IEC 60068-2-1, 2)
  Storage Temperature  -40 ~ 70°C (-40 ~ 158°F)
  Storage Humidity  5 ~ 95% RH non-condensing (refer to IEC 60068-2-3)
Ordering Information
  PCIE-1810  800 kS/s, 12-bit Multifunction Card
Accessories
  PCL-10168H-1E  68-pin SCSI Shielded Cable with Noise Rejecting, 1 m
  PCL-10168H-2E  68-pin SCSI Shielded Cable with Noise Rejecting, 2 m
  PCL-10168-1E  68-pin SCSI Shielded Cable, 1 m
  PCL-10168-2E  68-pin SCSI Shielded Cable, 2 m
  ADAM-3968  68-pin DIN-rail SCSI Wiring Board
Introduction
The PCIE-1810 is a multifunction PCI Express card that includes digital I/O, analog I/O and counter functions. It also features a 800 kS/s 12-bit A/D converter and supports analog 
trigger for A/D data accquisition.
NEW
19-21
DAQ Boards 
19
Signal Conditioning
20
Industrial USB I/O 
Modules
21










