User manual
www.advantech.com/products
Online Download
Features
Specifications
Analog Input
  Channels  16 single-ended/ 8 differential (software programmable)
  Resolution  12 bits
  Max. Sampling Rate  Multi-channel, single gain: 1 MS/s 
Multi-channel, multi gain: 600 kS/s 
Multi-channel, multi gain, unipolar/bipolar: 400 kS/s
  FIFO Size  1,024 samples
Note: The sampling rate for each channels will be affected by used channel number. 
For example, if 4 channels are used, the sampling rate is 600k/4 = 125 kS/s per 
channel. (multi gain, without unipolar/bipolar mixed) 
  Overvoltage Protection  30 Vp-p
  Input Impedance  100 M:/10 pF (Off), 100 M:/100 pF (On)
  Sampling Modes  Software, onboard programmable pacer and external
  Trigger Modes  Pre-trigger, post-trigger, delay-trigger and about-
trigger
  Input Range (V, software programmable) & Absolute Accuracy
Unipolar N/A 0 ~ 10 0 ~ 5 0 ~ 2.5 0 ~ 1.25
Bipolar ±10 ±5 ±2.5 ±1.25 ±0.625
Absolute Accuracy (% of FSR)* 0.1 0.1 0.2 0.2 0.4
* ±1 LSB is added as the derivative for absolute accuracy
Analog Output (PCI-1712 only)
  Channels  2
  Resolution  12 bits
  Output Rate  1 MS/s max.
  FIFO Size  32,768 samples
  Output Range  (Software programmable)
Internal Reference
Bipolar ±5 V, ±10 V
Unipolar 0 ~ 5 V, 0 ~ 10 V
External Reference
0 ~ +x V @ +x V (-10 d x d 10) 
-x ~ +x V @ +x V (-10 d x d 10)
  Slew Rate  20 V/µs
  Driving Capability  10 mA
  Output Impedance  0.1 : max.
  Operation Mode  Static update, waveform generation
  Accuracy  INLE: ±1 LSB 
DNLE: ±1 LSB
Digital Input
  Channels  16
  Compatibility  5 V/TTL
  Input Voltage  Logic 0: 0.8 V max. 
Logic 1: 2.0 V min.
Digital Output
  Channels  16
  Compatibility  5 V/TTL
  Output Voltage  Logic 0: 0.8 V max. 
Logic 1: 2.0 V min.
  Output Capability  Sink: 8.0 mA @ 0.8 V 
Source: 0.4 mA @ 2.0 V
Pacer/Counter
  Channels  3
  Resolution  16 bits
  Compatibility  5 V/TTL
  Max. Input Frequency  10 MHz
  Reference Clock  Internal: 10 MHz, 1 MHz, 100 kHz, 10 kHz 
External Frequency: 10 MHz max.
General
  Bus Type  PCI V 2.2
  I/O Connector  1 x 68-pin SCSI female connector
  Dimensions (L x H)  175 x 100 mm (6.9" x 3.9")
  Power Consumption  Typical: 5 V @ 850 mA, 12 V @ 600 mA 
Max.: 5 V @ 1.0 A, 12 V @ 700 mA
  Operating Temperature  0 ~ 60°C (32 ~ 140°F) 
  Storage Temperature  -20 ~ 85°C (-4 ~ 185°F)
  Storage Humidity  5 ~ 95% RH non-condensing 
Ordering Information
  PCI-1712  1 MS/s, 12-bit High-speed Multifunction PCI Card
  PCI-1712L  1 MS/s, 12-bit High-speed Multi. PCI Card w/o AO
Accessories
  PCLD-8712  DIN-rail Wiring Board for PCI-1712/L
  PCL-10168-1E  68-pin SCSI Shielded Cable, 1 m
  PCL-10168-2E  68-pin SCSI Shielded Cable, 2 m
  ADAM-3968  68-pin DIN-rail SCSI Wiring Board
PCI-1712/L
  16 single-ended or 8 differential or a combination of analog inputs
  12-bit A/D converter, with up to 1 MHz sampling rate
  Programmable gain
  Automatic channel/gain scanning
  Onboard FIFO memory (AI: 1,024 samples AO: 32,768 samples)
  Two 12-bit analog output channels with continuous waveform output function 
(PCI-1712 only)
  16-ch digital input and 16-ch digital output
  Three 16-bit programmable multifunction counter/timers on 10 MHz
  Auto-calibration (AI/AO)
  PCI-Bus mastering data transfer
  Pre-, post-, about- and delay-trigger data acquisition modes for analog input 
channels
  Flexible triggering and clocking capabilities
1 MS/s, 12-bit, 16-ch PCI 
Multifunction DAQ Card
19-25
DAQ Boards 
19
Signal Conditioning
20
Industrial USB I/O 
Modules
21










