User manual
Data Acquisition Boards 
Features
Specifications
Digital Input 
  Channels  24 (shared with output)
  Compatibility  5 V/TTL
  Input Voltage  Logic 0: 0.8 V @ -0.2 mA 
Logic 1: 2.0 V @ 20 mA
  Interrupt Capable Ch.  2
Digital Output 
  Channels  24 (shared with input)
  Compatibility  5 V/TTL
  Output Voltage  Logic 0: 0.5 V max. 
Logic 1: 3.7 V min.
  Output Capability  Sink: 0.5 V @ 24 mA 
Source: 3.7 V @ 24 mA
General
  Bus Type  Universal PCI V2.2
  I/O Connectors  1 x DB25 female connector
  Dimensions (L x H)  120 x 64 mm (4.7" x 2.5") Low profile MD1 
  Power Consumption  Typical: 5 V @ 140 mA 
Max.: 5 V @ 200 mA
  Operating Temperature  0 ~ 70°C (32 ~ 158°F)
  Storage Temperature  -20 ~ 80°C(-4 ~ 176°F)
  Storage Humidity  5 ~ 95% non-condensing
PCI-1757UP
24-ch Digital I/O Low Profile Universal 
PCI Card
  Low profile PCI form factor
  Universal PCI bus
  24 TTL level digital I/O channels
  Emulates mode 0 of 8255 PPI
  Buffered circuits provide higher driving capability
  Interrupt handling capability
  Output status read-back
  I/O configurable by software or on board DIP switch
  Keeps the output settings and values after system hot reset
  BoardID™ switch
  Convenient DB25 connector
  Supports both dry and wet contact
Ordering Information
  PCI-1757UP  24-ch Digital I/O Low Profile Universal PCI Card
Accessories
  ADAM-3925  DB25 DIN-rail Wiring Board
  PCL-10125-1E  DB25 Cable, 1 m
  PCL-10125-3E  DB25 Cable, 3 m
Pin Assignments
Introduction
PCI-1757UP is a 24-channel digital I/O low profile PCI card that meets the PCI standard REV.2.2 (universal PCI expansion card). The card also works with 3.3 V and 5 V PCI slots, 
and provides you with 24 parallel digital input/output channels that emulate mode 0 of the 8255 PPI chip. However, the buffered circuits offer a higher driving capability than the 8255.
19-38










