User manual

19 Chapter 2
5. After you have finished configuring the device, click OK and the
device name will appear in the Installed Devices box as seen
below:
Figure 2.7: Device Name on List of Devices Box
After your card is properly installed and configured, you can click the
Test… button to test your hardware by using the testing utility supplied.
For more detailed information, please refer to Chapter 2 of the Device
Drivers Manual.
You can also find the rich examples on the CD-ROM to speed up your
programming.
Note: As we have noted, the device name
“000:PCI-1723 BoardID=0 I/O=6500H”
begins with a device number “000”, which is
specifically assigned to each card. The
device number is passed to the driver to
specify which device you wish to control.