User manual

PCI-1724U User Manual 16
After the PCI-1724U card is installed, you can verify whether it is prop-
erly installed on your system in the Device Manager:
1. Access the Device Manager through Control Panel/System/Device
Manager.
2. The device name of the PCI-1724U should be listed on the Device
Manager tab on the System Property Page.
Figure 2.3: The Device Name Listed on the Device Manager
If your card is properly installed, you should see the device name of your
card listed on the Device Manager tab. If you do see your device name
listed on it but marked with an exclamation sign “!”, it means your card
has not been correctly installed. In this case, remove the card device from
the Device Manager by selecting its device name and press the Remove
button. Then go through the driver installation process again.
After your card is properly installed on your system, you can now config-
ure your device using the Advantech Device Manager Program that has
itself already been installed on your system during driver setup. A com-
plete device installation procedure should include device setup, configu-
ration and testing. The following sections will guide you through the
Setup, Configuration and Testing of your device.