User manual

PCI-1724U User Manual 24
3.2.3 Setting the Time to Reset Analog Outputs
Some users will want the capability of clearing each analog output when
the system (or PC) issues a reset signal on the PCI bus. Some users will
want to clear their analog output only as part of system power-on.
The PCI-1724U satisfies both these needs by providing jumper JP67.
Depending on the application, this capability may allow analog outputs to
be "ZERO" without requiring a complete shutdown of processes con-
trolled by the card.
Complete loss of power to the chip clears the chip memory. Thus, no mat-
ter how JP1 is set, if the power to the PCI-1724U is disconnected, the
analog output initial power-on state will be "ZERO".
3.2.4 Board ID setting
Note: On: 1, Off: 0
ID3 ID2 ID1 ID0 Board ID
1111 0
1110 1
1101 2
1100 3
1011 4
1010 5
1001 6
1000 7
0111 8
0110 9
0101 10
0100 11
0011 12
0010 13
0001 14
0000 15