Specifications

Chapter 2 Installation 9
2.1 Initial Inspection
Before starting to install the PCI-1757UP, make sure there is no visible
damage on the card. We carefully inspected the card both mechanically
and electrically before shipment. It should be free of marks and in perfect
order on receipt.
As you unpack the PCI-1757UP, check it for signs of shipping damage
(damaged box, scratches, dents, etc.) If it is damaged or fails to meet its
specifications, notify our service department or your local sales
representative immediately. Also, call the carrier immediately and retain
the shipping carton and packing materials fo r inspection by the carrier. We
will then make arrangements to repair or replace the unit.
2.2 Unpacking
The PCI-1757UP contains components that are sensitive and vulnerable to
static electricity. Discharge any static electricity on your body to ground
by touching the back of the system unit (grounded metal) before you touch
the board.
Remove the PCI-1757UP card from its protective packaging by grasping
the card's rear panel. Handle the card only by its edges to avoid static
discharge which could damage its integrated circuits. Keep the antistatic
package. Whenever you remove the card from the PC, please store the
card in this package for its protection.
You should also avoid contact with materials that hold static electricity
such as plastic, vinyl and styrofoam. Check the product contents inside the
packing. There should be one card, one CD-ROM, and this manual. Make
sure nothing is missing.