Specifications

10 PCI-1757UP User's Manual
2.3 Jumper & Switch Settings
We designed the PCI-1757UP with ease-of-use in mind. It is a "plug and
play" card, i.e. the system BIOS assigns the system resources such as base
address and interrupt automatically. The following section describes how
to configure the card. You may want to refer to the figure below for help
in identifying card components.
Figure 2-1: Location of connectors and jumpers
Setting to Broad ID (SW1)
This section describes how to set the Broad ID of PCI-1757UP. The
figure and table below show the switch locations and setting how to
set Board ID.