Specifications

14 PCI-1757UP User's Manual
2.5 Installation Instructions
The PCI-1757UP can be installed in any PCI slot in the computer.
However, refer to the computer user's manual to avoid any mistakes and
danger before you follow the installation procedure below:
1. Turn off your computer and any accessories connected to the computer.
Warning! TURN OFF your computer power supply whenever you
install or remove any card, or connect and disconnect
cables.
2. Disconnect the power cord and any other cables from the back of the
computer.
3. Remove the cover of the computer.
4. Select an empty PCI slot. Remove the screw that secures the expansion
slot cover to the system unit. Save the screw to secure the interface card
retaining bracket.
5. Carefully grasp the upper edge of the PCI-1757UP. Align the hole in the
retaining bracket with the hole on the expansion slot and align the gold
striped edge connector with the expansion slot socket.
Press the card into the socket gently but firmly. Make sure the card fits
the slot tightly.
6. Secure the PCI-1757UP by screwing the mounting bracket to the back
panel of computer.
7. Attach any accessories (25-pin cable, wiring terminal, etc.) to the card.
8. Replace the cover of your computer. Connect the cables you removed in
step 2.
9. Turn the computer power on.