User manual

PCL-818 Series User Manual 4
Keeping Output Values after System Reset
When the system is hot reset (power not shut down), the PCL-818HD/
HG/L can either retain the last analog output values, or return to its
default configuration, depending on the jumper setting. This practical
function eliminates danger caused by improper operation during unex-
pected system reset.
Board ID
The PCL-818HD/HG/L has a built-in DIP Switch that helps define each
card’s ID when multiple PCL-818HD/HG/L cards have been installed on
the same PC chassis. The board ID setting function is very useful when
users build their system with multiple PCL-818HD/HG/L cards. With
correct Board ID settings, you can easily identify and access each card
during hardware configuration and software programming.
Note: For detailed specifications of the PCL-818HD/HG/L, please refer
to Appendix A, Specifications.
1.3 Applications
• Transducer and sensor measurements
• Waveform acquisition and analysis
• Process control and monitoring
• Vibration and transient analysis