Specifications

Chapter 2 Hardware Installation 13
The following example shows how to set the card base address to
2F8.
The switch sum is set to 2F8: 200 + 80 + 40 + 20 + 10 + 8 (HEX).
Note: On the PCL-846/847, the address line A9 does not appear on
the DIP switch, as it is permanently hardwired to hex 200.
Interrupt Level (IRQ) Setting
(S2, JP11, JP12, JP13, JP14)
The card's IRQ mode can be set using S2. Please note that the DIP
switch on S2 labelled MODE 0 is for setting the mode, as shown
below.
Shared IRQ Mode (default) Independent IRQ Mode