Specifications

48 PCM-4825/4845L User's Manual
5.6 Windows 95 drivers setup procedure
1. Boot system with VGA or SuperVGA driver.
2. Select properties from a menu after right button press.
3. Select display.
4. Select Change Display.
5. Select Change Monitor.
6. Select Change Adapter.
7. Select Have Disk.
5.7 Windows NT drivers setup procedure
5.7.1 Step 1
1.Install Windows NT as you normally would for a VGA display.
2.First click the Start button,choose Settings and click on Control
Panel.
3.Choose the Display icon and click on the icon.
4.In the Display Properties window, click on the Settings tab.
5.Click on Change Display Type. In the Change Display Type
window, click on the Change button under Adapter Type. This
will bring up the Select Device window.
5.7.2 Step 2
1.In the Select Device window, click on Have Disk. Enter source
directory where the Windows NT driver files are located.
2.Press <ENTER> and the name of the Chips and Technologies
Video Accelerator driver will appear in the Models list box.
Select a driver, then click OK or press enter.
3.A warning panel about Third Party drivers will appear. Click the
Yes button to finish installation.
4.Once the installation is complete, the system must be shut down
and restarted.