User manual

PDC-190S User Manual 10
2.2 Preparing for First-time Use
No tools are required to set up the LCD monitor. Simply follow the instructions out-
lined in the next few sections. Connectors for the signal cables and power are located
on the back of the panel behind the cover door.
PC Line IN/Audio Line IN
connector (2.5 mm phone
jack)
Input connector for audio signals.
USB Hub Port (type A)
USB downstream port (to peripheral USB
devices).
Equipotential terminal
Connects the equipotential plug (As below pic-
ture).
DVI-I input connector
Inputs DVI Rev.1.0 applicable digital RGB sig-
nal.
Or inputs an analog RGB video signal (0.7 Vp-p,
positive polarity) and sync signal.
YPbPr/RGBS input connector
Input connector for component video signals /
RGB signals.
USB Port (type B) USB upstream port (to PC host devices).
Caution! To select the signal input for each connector manually, press the source
button on the monitor.