User manual

3 Chapter 1
– BIOS: Award 512 KB Flash BIOS, supports Plug & Play and
APM
– Chipset: Intel® 915GM GMCH, 82801FBM (ICH6-M)
– Front side Bus: FSB 533/400 MHz
– RAM: 240 pins DDR2 DIMM slots x 2, supports unbuffered 400/
533 MHz DDR2 SDRAM (Non ECC), capacity maximum to 2 GB
– IDE interface: ATA/100 x 1. Supports one IDE device
– SATA interface: SATA x 1. Support one SATA device
– Parallel port: Parallel port x 1, supports SPP/BPP/EPP/ECP paral-
lel mode
– Serial ports: RS-232 port x 3. All ports are compatible with
16C550 UARTs. COM2 has optical isolation and supports RS-422/
RS-485 by jumper selection; COM1/COM2/COM3 support +5 by
jumper selection
– Universal serial bus (USB) port: USB 2.0 port x 8 (6 external, 2
internal)
– IEEE 1394 port: IEEE 1394a port x 3
– Expansion slot: PCI/33 MHz slot x 1
– Watchdog timer: 62-level, interval 1 ~ 62 seconds. Automatically
generates system reset when the system stops due to a program
error or EMI
– CMOS Battery (BIOS): 3.0 V @ 195 mA lithium battery
1.2.3 Flat panel interface
• SDVO Interface: Chrontel 7308A Single/ Dual LVDS transmitter
• Display resolution: Supports LVDS LCD panel resolutions up to 1600
x 900
• Graphic Chipset: Intel® Graphics Media Accelerator (GMA) 900
• Shared memory: Dynamic Video Memory Technology (DVMT) 3.0
to dynamically allocate up to 128 MB of system memory for graphics
use
• Display type: Simultaneously supports CRT
1.2.4 Audio function
• Chipset: Realtek ALC202, compliant with AC’97 rev 2.2
• Audio controller: 18-bit codec, full-duplex stereo codec
• Audio interface: Microphone-in, Line-in, Line-out