User manual

POC-175 User Manual viii
24. This equipment shall not be used in life support systems.
25. Accessory equipment connected to the analog and digital interfaces
must be in compliance with the respective nationally harmonized
IEC standards (i.e. IEC 60950 for data processing equipment, IEC
60065 for video equipment, IEC 61010-1 for laboratory equipment,
and IEC 60601-1 for medical equipment.) Furthermore all configu-
rations shall comply with the system standard IEC 60601-1-1.
Everybody who connects additional equipment to the signal input
output, configures a medical system, and is therefore responsible
that the system complies with the requirements of the system stan-
dard IEC 60601-1-1. The unit is for exclusive interconnection with
IEC 60601-1 certified equipment in the patient environment and
IEC 60XXX certified equipment outside of the patient environ-
ment. If in doubt, consult the technical services department or your
local representative.
26. The user is not to touch SIP/SOPs and the patient at the same time.
27. The sound pressure level at the operator's position according to IEC
704-1:1982 is no more than 70dB (A).
DISCLAIMER This set of instructions is given according to
IEC 704-1. Advantech disclaims all responsibil-
ity for the accuracy of any statements con-
tained herein