User Manual POC- S195 Pentium® M Processor-Based Slim Point-of-Care Terminal with 19" TFT LCD
Copyright The documentation and the software included with this product are copyrighted 2008 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Declaration of Conformity CE This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly recommend the use of CE-compliant industrial enclosure products.
Technical Support and Assistance 1. 2. Visit the Advantech web site at www.advantech.com/support where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
Warning! 1. Input voltage rated 100-240 VAC, 50-60 Hz, 4-2 A (AC Mode) 2. Use a 3 V @ 195 mA lithium battery (Model No. BR2032) 3. Packing: please carry the unit with both hands, handle with care 4. Our European representative: Advantech Europe GmbH Kolberger Straße 7 D-40599 Düsseldorf, Germany Tel: 49-211-97477350 Fax: 49-211-97477300 5. Maintenance: to properly maintain and clean the surfaces, use only approved products or clean with a dry applicator Safety Instructions 1. 2. 3. 4. 5. 6. 7. 8. 9. 10.
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT SHOULD BE IN A CONTROLLED ENVIRONMENT. 16. If your computer clock setting is wrong or the BIOS configuration resets to default, the battery may have no power. Caution! 1. Do not replace battery yourself. Please contact a qualified technician or your retail. 2.The computer is provided with a battery-powered real-time clock circuit. There is a danger of explosion if battery is incorrectly replaced.
60601-1-1. Anyone who connects additional equipment to the signal inputs or signal outputs is configuring a medical system, and is therefore, responsible that the system complies with the requirements of the system standard IEC 606011-1. The unit is for exclusive interconnection with IEC 60601-1 certified equipment in the patient environment and IEC 60XXX certified equipment outside of the patient environment. If in doubt, consult the technical services department or your local representative. 25.
Wichtige Sicherheishinweise 1. 2. 3. Bitte lesen sie Sich diese Hinweise sorgfältig durch. Heben Sie diese Anleitung für den späteren Gebrauch auf. Vor jedem Reinigen ist das Gerät vom Stromnetz zu trennen. Verwenden Sie Keine Flüssig-oder Aerosolreiniger. Am besten dient ein angefeuchtetes Tuch zur Reinigung. 4. Die NetzanschluBsteckdose soll nahe dem Gerät angebracht und leicht zugänglich sein. 5. Das Gerät ist vor Feuchtigkeit zu schützen. 6.
Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage. To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on. Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive electronic components.
POC-S195 User Manual x
Contents Chapter 1 General Information ............................1 1.1 1.2 Introduction ............................................................................................... 2 Specifications ............................................................................................ 2 1.2.1 General ......................................................................................... 2 1.2.2 Power Adapter: 100 Watts Max .................................................... 2 1.2.
Chapter 5 Audio Interface.................................. 23 5.1 5.2 Introduction ............................................................................................. 24 5.2 Installation of Audio Driver ................................................................ 24 5.2.1 5.3 Further Information ............................................................... 26 6 Touchscreen Interface...................... 27 6.1 6.2 6.3 6.4 Introduction ..............................................
A.14 A.15 A.16 A.17 A.18 A.19 A.20 A.21 A.22 A.23 Table A.13:USB Connector (CN18) ............................................ 41 Keyboard/Mouse Connector(CN20)........................................................ 42 Figure A.14:POC-S195 KB/MS connector .................................. 42 Table A.14:USB KB/MS (CN20) ................................................. 42 LVDS Connectors (CN26, CN25)............................................................ 42 Figure A.15:POC-S195 LVDS connector........
Figure D.1: VESA mounting dimension diagram (75 x 75 mm, 100 x 100 mm) ................................................................
Chapter 1 1 General Information
1.1 Introduction The POC-S195 is a multimedia Pentium® Mobility processor-based computer that is designed to serve as a Point-of-Care terminal (POC.) It is a PC-based system with 19" color TFT LCD display, on-board PCI Ethernet controller, dual COM port interfaces and a 16-bit stereo audio controller. With a built-in 2.5" HDD drive, and CF card sockets, the POC-S195 is as slim and user-friendly as a notebook computer and fan less.
Chipset: Intel 855GME Memory Size: Optimized shared memory architecture, supports 64MB frame buffer using system memory Display type: Simultaneously supports flat panel displays (EL, LCD and gas plasma) Display resolution: Supports TFT LCD displays up to 1280 x 1024 @ 16 M colors Chipset: Realtek ALC203 Audio controller: 16-bit codec, Full-Duplex stereo single-chip PCI audio solution Speaker: Full alarm volume > 70 dB(A) 1 meter Stereo sound: 100% DOS GAME compatible (Sound Blaster or Sound
1.2.9 Environment Temperature: 0 ~ 35° C (32 ~ 95° F) Relative humidity: -5° C to 40° C / 95% RH operating, -40° C to 60° C/ 95% RH Storage Shock: 20 G, half sine, 11 msec duration Vibration: 5-500Hz, PSD 0.002G²/Hz, 1Grms, 1 Oct/min, 3 axes, 1 hr/per axis Altitudes: Operational: 6,000 feet; shipping: 40,000 feet Certifications: EMC: CE, FCC approved Safety: UL60601-1 and EN60601-1 approved.
Chapter 1 1.4 1.4 Dimensions General Information Figure 1.
POC-S195 User Manual 6
Chapter 2 System Setup 2
2.1 2.1 A Quick Tour of the POC-S195 Before you start to set up the POC-S195, take a moment to become familiar with the locations and purposes of the controls, drives, connections and ports, which are illustrated in the figures below. When you place the POC-S195 upright on the desktop, its front panel appears as shown in Figure 2-1. A B C D E F Figure 2.
Chapter 2 System Setup Figure 2.2: Rear view of the Point-of-Care Terminal 2.2 2.2 Installation Procedures 2.2.1 Connecting the Power Cord The POC-S195 can only be powered by a DC power adapter (SINPRO Model no. MPU100-108). Be sure to always handle the power cords by holding the plug ends only. Follow these procedures in order: 1. Connect the female end of the power adapter to the DC jack of the panel PC. (See Figure 2-3.) 2. Connect the female end of the power cord to the DC power adapter 3.
4. Figure 2.3: Connecting the power cord After finishing all the above installation steps, please jump to section 2.2.2 and continue your installation procedure. 2.2.2 Connecting the Keyboard and Mouse 1. 2. Connect the Y-shaped adapter to the PS/2 mouse and keyboard port on the I/O section of the POC-S195. (See Figure 2-4.) Connect the PS/2 mouse and keyboard to the Y-shaped adapter. (See Figure 24.) Note! PS/2 devices are not allowed to hot swap in order to avoid any damage.
Chapter 2 System Setup Figure 2.4: Connecting the mouse and keyboard 2.2.3 Switch on the Power Switch on the reset switch on the front cover. 2.2.4 Connecting the COM Ports (COM 1, 2) Com 2 Com 1 Figure 2.
2.3 Running the BIOS Setup Program Your POC-S195 is likely to have been properly set up and configured by your dealer prior to delivery. You may still find it necessary to use the BIOS (Basic Input-Output System) setup program to change system configuration information, such as the current date and time or your type of hard drive. The setup program is stored in readonly memory.
Note! The drivers and utilities used for the POC-S195 panel PCs are subject to change without notice. If in doubt, check Advantech's website or contact our application engineers for the latest information regarding drivers and utilities. 13 POC-S195 User Manual System Setup Figure 2.6: File directory on ‘Drivers and Utilities’ CD-ROM Chapter 2 The various drivers and utilities on the CD-ROM disc have their own text files which help users install the drivers and understand their functions.
POC-S195 User Manual 14
Chapter 3 PCI BUS Ethernet Interface 3
3.1 Introduction The POC-S195 is equipped with a high-performance 32-bit Ethernet chipset which is fully compliant with IEEE 802.3, 100 Mbps CSMA/CD standards. It is supported by major network operating systems. It is also both 100Base-T and 10Base-T compatible. 3.2 Installation of Ethernet Driver 3.2.1 Driver Installation for Windows 2000/XP The POC-S195 utilizes Realtek RTL8100C as an Ethernet controller. Microsoft has released a compatible driver for Windows XP.
For further information about the Ethernet installation in your POC-S195, including driver updates, troubleshooting guides and FAQ listings, please visit the following web resources: Realtek website: http://www.realtek.com.tw/Default.aspx?Langid=1 Advantech websites: www.advantech.com; www.advantech.com.tw PCI BUS Ethernet Interface Chapter 3 3.
POC-S195 User Manual 18
Chapter 4 4 Integrated Graphic Controller Setup
4.1 Introduction The POC-S195 has an onboard flat panel interface. The specifications and features are described as follows: 4.1.1 4.1.1 Chipset The POC-S195 uses an Intel 855GME for its graphic controller. It supports LVDS LCD displays, and standard progressive scan analog monitors. 4.1.2 4.1.
Chapter 4 Start Step 1: Run win2k_xp141.exe under the folder D:\VGA. Integrated Graphic Controller Setup Step 2: Follow the introduction and click the "Next" button. Step 3: Install Completely and click the "Finish" button.
4.3 Further information For further information about the AGP/SVGA installation in your POC-S195, including Driver updates, troubleshooting guides and FAQ listings please visit the following web resources: Intel website: www.intel.com.tw Advantech websites: www.advantech.com; www.advantech.com.
Chapter 5 Audio Interface 5
5.1 Introduction The POC-S195's onboard audio interface provides high-quality stereo sound and FM music synthesis (ESFM) by using the ALC203 audio controller from Realtek. The audio interface can record, compress, and play back voice, sound, and music with a built-in mixer control. The POC-S195's onboard audio interface also supports the Plug and Play (PnP) standard and provides PnP configuration for audio, FM, and MPU-104 logical devices. It is compatible with Sound Blaster, Sound Blaster Pro version 3.
Chapter 5 Start Audio Interface Step 1: Run wdm_a357.exe under the folder D:\Audio. Step 2: Follow the introduction and click the "Next" button. Step 3: Press the button "Continue Anyway". Step 4: Install Completely, and click the "Finish" button.
5.2.1 5.3 Further Information For further information about the Audio interface installation in your POC-S195, included Driver updates, troubleshooting guides and FAQ lists please visit the following web resources. Realtek website: www.realtek.com.tw Advantech websites: www.advantech.com; www.advantech.com.
Chapter 6 6 Touchscreen Interface
6.1 Introduction 6.1.1 General Information The POC-S195's optional touchscreen incorporates advanced second-generation 5wire resistive technology. They allow 75% light transmission respectively. The resistive and capacitive models have an antiglare surface. All models provide greatly enhanced visual resolution. They also have new improved scratch-resistant features. The touchscreen is manufactured from UL-recognized components.
Note! The external CD-ROM drive is designated as ‘D’ throughout this chapter. Note! means pressing the ‘Enter’ key on the keyboard. 29 POC-S195 User Manual Touchscreen Interface The following Windows illustrations are examples only. You must follow the flow chart instructions and pay attention to the instructions which appear on your screen.
Start Step 1: Run setup.exe through the path D:\TouchDriver\Driver\ All_In_One_2K_XP_Vista\. Step 2: Follow the introduction and click the "Next" button. Step 3: Press the button "OK". Step 4: EETI Touch Controller is connected to COM3. Press "Yes" button. Step 5: Install Completely, start calibration. Press "Yes".
If you cannot select objects accurately with your finger or a stylus, you may need to recalibrate the touchscreen. To calibrate the touchscreen: 1. Click ‘Start’ => ‘All Programs’ => ‘Touchkit’ => ‘Configure Utility’. Select ‘Tools’ first. Two modes can be selected, ‘4 points calibration’ and ‘Linearization’. An example of ‘Linearization’ is shown here. 3. Click on each cross until you hear a beep sound 31 POC-S195 User Manual Touchscreen Interface 2. Chapter 6 6.3 6.
4. Please wait until the driver registers the parameters, then click ‘OK’. 6.4 6.4 Further Information For further information about the Touchscreen installation in your POC-S195, included Driver updates, troubleshooting guides and FAQ lists please visit the following web resources: EETI website: http://www.eeti.com.tw/ Advantech websites: www.advantech.com; www.advantech.com.
Appendix A Description of Connectors A
Figure A Top Side Global View of PCM-9686S A101-7 Motherboard indicates all connectors' local. A.1 DC-in Power Connector Figure A.1: POC-S195 DC-in power connector Table A.1: ATX Power Connector (CN21) Pin No.
Figure A.2: POC-S195 Inverter power connector Table A.2: Inverter Power Connector (CN8) Pin No. Signal Description 1 +12V 2 GND 3 ENABLE 4 Brightness Adjustment 5 +5V A.3 Internal Speaker Connector Figure A.3: POC-S195 Internal speaker connector Table A.3: : Internal Speaker Connector (CN1) Pin No. Signal Description 1 Speaker out L- 2 Speaker out L+ 3 Speaker out R+ 4 Speaker out R- 35 POC-S195 User Manual Appendix A Description of Connectors A.
A.4 Front Panel Control Connector Figure A.4: POC-S195 Flat panel control connector Table A.4: Power-on Push Button Connector (CN17) Pin No. Signal Description 1 Power SW+ 2 Power SW- A.5 Power On/Off Indicator LED Connector Figure A.5: POC-S195 power on/off indicator connector Table A.5: Power On/Off Indicator Connector (CN35) Pin No.
Figure A.6: POC-S195 Battery connector Table A.6: IR Connector (CN14) Pin No. Signal Description 1 Battery Power 2 Battery Power 3 SM BUS Clock 4 SM BUS Data 5 Battery Thermal 6 GND 7 GND A.7 EIDE Hard Disk Drive Connector-Primary/Master Figure A.7: POC-S195 EIDE hard drive connector Table A.7: EIDE Hard Disk Connector (CN9) Pin No. Signal Description 1 IDE RESET 2 GND 3 DATA7 4 DATA8 5 DATA6 6 DATA9 37 POC-S195 User Manual Appendix A Description of Connectors A.
Table A.
Figure A.8: POC-195 CPU fan connector Table A.8: CPU Fan Power Connector (CN31) Pin No. Signal Description 1 FAN_DET 2 +12V 3 GND A.9 System Fan Power Connector (Reserved) Figure A.9: POC-S195 System fan connector Table A.9: System Fan Power Connector (CN16) Pin No. Signal Description 1 FAN_DET 2 +12V 3 GND 39 POC-S195 User Manual Appendix A Description of Connectors A.
A.10 PCI Bus Expansion Connector (CN4) Figure A.10: POC-S195 mini PCI slot connector Table A.10: Mini PCI Slot (CN4) Pin No. Note! Signal Description This PCI slot uses standard PCI Bus V2.2. If you wish to use this slot, you can connect the add-on mini PCI cards directly without any issues. A.11 VGA Connector (CN23) Figure A.11: POC-S195 VGA connector Table A.11: VGA Connector (CN23) Pin No. Note! Signal Description POS-S195 supports Standard analog display interface DSUB15 VGA Connector.
Figure A.12: POC-S195 COM connector Table A.12: COM Pins COM1(CN22) & COM2(CN24) Configure Signal Description Pin No. RS-232 RS-422 RS-485 1 DCD TX- DATA- 2 RX TX+ DATA+ 3 TX RX+ -- 4 DTR RX- -- 5 GND GND -- 6 DSR -- -- 7 RTS -- -- 8 CTS -- -- 9 RI -- -- A.13 USB Connectors Figure A.13: POC-S195 USB connector Table A.13: USB Connector (CN18) Pin No.
Table A.13: USB Connector (CN18) 4 GND A.14 Keyboard/Mouse Connector(CN20) Figure A.14: POC-S195 KB/MS connector Table A.14: USB KB/MS (CN20) Pin No. Signal Description 1 Keyboard Data 2 Mouse Data 3 GND 4 Keyboard/Mouse Power 5 Keyboard Clock 6 Mouse Clock A.15 LVDS Connectors (CN26, CN25) Figure A.15: POC-S195 LVDS connector Table A.15: LVDS Connector (CN26, CN25) Pin No.
Appendix A Description of Connectors Table A.
A.16 LVDS Power Selection Figure A.16: POC-S195 LVDS Power Selection Table A.16: Power On/Off Indicator Connector (CN35) Pin No. Signal Description 1 3 LVDS Power 5 2 +5V 4 +3V 6 +12V A.17 Ethernet Connector Figure A.17: POC-S195 power on/off indicator connector Table A.17: Power On/Off Indicator Connector (CN19) Pin No.
5 NC 6 Rx- 7 NC 8 NC A.18 CF Connector Figure A.18: POC-S195 CF connector Table A.18: CF Connector (CN5) Pin No. Note! Signal Description POS-S195 supports Standard CF card with Type I/II A.19 DDR Memory Module Slot Figure A.19: POC-S195 Memory Slot 45 POC-S195 User Manual Appendix A Description of Connectors Table A.
Table A.19: Memory Slot (DIM1 and DIM2) Pin No. Note! Signal Description POS-S195 supports 184Pin ECC Double Data Rate (DDR)128 MB to 1G, accept 128/256/512 MB, 1G DDR200/266/333 DRAM. A.20 Audio Pin Header Figure A.20: POC-S195 Audio Pin Header Table A.20: Audio Pin Header (CN2) Pin No.
Figure A.21: POC-S195 Internal Pin Header Table A.21: Internal Pin Header (CN6 & CN7) Pin No. Signal Description 1 USB Power(USB4) 2 Data-(USB4) 3 Data+(USB4) 4 GND 5 USB Power(USB5) 6 Data-(USB5) 7 Data+(USB5) 8 GND 9 NC CN6 CN7 1 USB Power(USB2) 2 Data-(USB2) 3 Data+(USB2) 4 GND 5 USB Power(USB3) 6 Data-(USB3) 7 Data+(USB3) 8 GND 9 NC 47 POC-S195 User Manual Appendix A Description of Connectors A.
A.22 5-Wire Touch Screen Pin Header Figure A.22: POC-S195 5-Wire Resistive Touch Screen Pin Hdr Table A.22: : 5-Wire Resistive Touch Screen Pin Hdr (CN11) Pin No. Signal Description 1 Low side Right 2 Low side Left 3 Probe 4 Up side Right 5 Up side Left A.23 ICH4 GPIO Pin Header Figure A.23: POC-S195 ICH4 Pin Header Table A.23: ICH4 Pin Header (CN3) Pin No.
Appendix A Description of Connectors Table A.
POC-S195 User Manual 50
Appendix B B Jumper Setting and Connectors
B.1 Jumpers and Connectors B.1.1 Setting Jumpers You can configure your Point-of-Care Terminal to match the needs of your application by setting jumpers. A jumper is the simplest kind of electrical switch. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To ‘close’ a jumper, you connect the pins with the clip. To ‘open’ a jumper you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2, and 3.
B.2.1 COM1 Output Type Setting (JP11) COM1 can be configured to operate in RS-232, RS-422, or RS-485 mode. This is done via JP11. JP11 is the 18 pins jumper close to the COM Port Connector (CN22). Figure B.3: COM1 port configuration Table B.2: COM1 Port Configuration (JP11) Pin5,6 Pin7.9 Pin8,10 Pin13,15 Pin14,16 Closed COM2 is RS232 port (Default) Pin3,4 Pin9,11 Pin10,12 Pin15,17 Pin16,18 Closed COM2 is RS422 port 53 POC-S195 User Manual Appendix B Jumper Setting and Connectors Figure B.
Table B.2: COM1 Port Configuration (JP11) Pin1,2 Pin9,11 Pn10,12 Pin15,17 Pin16,18 Closed COM2 is RS485 port The IRQ and the address ranges for COM1, 2 are fixed. However, if you wish to disable the port or change these parameters later you can do this in the system BIOS setup. The table overleaf shows the default settings for the panel PC's serial ports. COM1 and COM2 are one set. You can exchange the address range and interrupt IRQ of COM1 for the address range and interrupt IRQ of COM2.
Appendix C C Hardware Installation
C.1 Overview of Hardware Installation and Upgrading The Slim Point-of-Care Terminal consists of a PC-based computer that is housed in a plastic rear panel and a metal shielding case. Your HDD, DDR DRAM, and so on are all readily accessible by removing the rear panel and shielding case. Any maintenance or hardware upgrades can be easily completed after removing the rear panel and shielding case. Note! The color LCD display installed in the Point-of-Care Terminal is high quality and reliable.
Appendix C Hardware Installation Figure C.1: Installing the primary 2.
POC-S195 User Manual 58
Appendix D VESA Mounting D
D.1 Install VESA Mounting The POC-S195 also provides standard VESA mounting to help system integrators conveniently integrate the panel PC into their system. Never use mounting brackets except those provided by Advantech in order to prevent unreliable mounting of the POC-S195. VESA mount installation should be performed by a professional technician. Please contact a service technician or your retailer if you need this service. Installation instructions follow: 1.
Appendix D VESA Mounting POC-S195 User Manual 61
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
