User manual

POC-S195 User Manual 4
1.2.9 Environment
 Temperature: 0 ~ 35° C (32 ~ 95° F)
 Relative humidity: -5° C to 40° C / 95% RH operating, -40° C to 60° C/ 95%
RH Storage
 Shock: 20 G, half sine, 11 msec duration
 Vibration: 5-500Hz, PSD 0.002G²/Hz, 1Grms, 1 Oct/min, 3 axes, 1 hr/per axis
 Altitudes: Operational: 6,000 feet; shipping: 40,000 feet
 Certifications: EMC: CE, FCC approved
 Safety: UL60601-1 and EN60601-1 approved.
This device bears the CE label in accordance with the provisions of the EMC
Directive 89/336/EMC and the Low Voltage Directive 73/23/EEC.
1.2.10 Cleaning/Disinfecting
During normal use, the POC-S195 may become soiled and should, therefore, be
cleaned regularly. Agents: Green tinctured soap and Enzymatic detergents
Steps:
1. Wipe the POC-S195 with a clean cloth that has been moistened in the cleaning
solution.
2. Prepare agent per manufacturer's instructions or hospital protocol.
3. Wipe thoroughly with a clean cloth
1.3 1.3 LCD Specifications
 Display type: 19" TFT LCD.
 Resolution: 1280 x 1024
 Colors: 16.7M (8 bits/color)
 Dot size (mm): 0.294 x 0.294
 Viewing angle: 178°x178°
 Luminance: 300 cd/m2
 Contrast ratio: 1300 : 1
 LCD MTBF: 50,000 hours
 Backlight lifetime: 50,000 hours
Caution! Do not immerse or rinse the POC-S195 and its peripherals. If you acci-
dentally spill liquid on the device, disconnect the unit from the power
source. Contact your Biomed regarding the continued safety of the unit
before placing it back in operation.
Do not spray cleaning agents on the chassis.
Do not use disinfectants that contain phenol. Do not autoclave or clean
the POC-S195 or its peripherals with strong aromatic, chlorinated,
ketone, ether, or Esther solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.