User manual

POC-S195 User Manual 10
Figure 2.3: Connecting the power cord
4. After finishing all the above installation steps, please jump to section 2.2.2 and
continue your installation procedure.
2.2.2 Connecting the Keyboard and Mouse
1. Connect the Y-shaped adapter to the PS/2 mouse and keyboard port on the I/O
section of the POC-S195. (See Figure 2-4.)
2. Connect the PS/2 mouse and keyboard to the Y-shaped adapter. (See Figure 2-
4.)
Note!
PS/2 devices are not allowed to hot swap in order to avoid any damage.