User manual

POC-S195 User Manual 24
5.1 Introduction
The POC-S195's onboard audio interface provides high-quality stereo sound and FM
music synthesis (ESFM) by using the ALC203 audio controller from Realtek. The
audio interface can record, compress, and play back voice, sound, and music with a
built-in mixer control. The POC-S195's onboard audio interface also supports the
Plug and Play (PnP) standard and provides PnP configuration for audio, FM, and
MPU-104 logical devices. It is compatible with Sound Blaster, Sound Blaster Pro ver-
sion 3.01, voice, and music functions. The ESFM synthesizer is register compatible
with the OPL3 and has extended capabilities.
5.2 5.2 Installation of Audio Driver
Before installing the audio driver, please take note of the procedures detailed below.
You must know which operating system you are using in your POC-S195, and then
refer to the corresponding installation flow chart. Just follow the steps in the flow
chart. You can quickly and successfully complete the installation, even if you are not
familiar with instructions for Windows.
Note!
The following Windows illustrations are examples only. You must follow the flow
chart instructions and pay attention to the instructions which appear on your
screen.
Note!
The external CD-ROM drive is designated as "D" throughout this chapter.
Note!
<Enter> means pressing the ‘Enter’ key on the keyboard.