User manual

31 POC-S195 User Manual
Chapter 6 Touchscreen Interface
6.3 6.3 Touchscreen Calibration
If you cannot select objects accurately with your finger or a stylus, you may need to
recalibrate the touchscreen.
To calibrate the touchscreen:
1. Click ‘Start’ => ‘All Programs’ => ‘Touchkit’ => ‘Configure Utility’.
2. Select ‘Tools’ first. Two modes can be selected, ‘4 points calibration’ and ‘Lin-
earization’. An example of ‘Linearization’ is shown here.
3. Click on each cross until you hear a beep sound