User manual

POC-S195 User Manual vi
(140° F). THIS COULD DAMAGE THE EQUIPMENT. THE EQUIPMENT
SHOULD BE IN A CONTROLLED ENVIRONMENT.
16. If your computer clock setting is wrong or the BIOS configuration resets to
default, the battery may have no power.
17. IMPROPER INSTALLATION OF VESA MOUNTING CAN RESULT IN SERI-
OUS PERSONAL INJURY! VESA mount installation should be performed by a
professional technician. Please contact the service technician or your retailer if
you need this service.
18. CLASSIFICATION:
– Supply Class I adapter
– No applied part
– IP54
– Continuous Operation
– Not AP or APG category
19. Disconnect device: Appliance inlet.
20. Follow national requirements for proper disposal of unit.
21. Maintenance: to properly maintain and clean the surfaces, use only approved
products or clean with a dry applicator.
22. Contact information:
– No.1, Alley 20, Lane 26, Reuiguang Road Neihu District, Taipei,
– Taiwan 114, R.O.C.
– TEL: [phone]
23. This equipment shall not be used for life support systems.
24. Accessory equipment connected to the analog and digital interfaces must be in
compliance with the respective nationally harmonized IEC standards (i.e. IEC
60950 for data processing equipment, IEC 60065 for video equipment, IEC
61010-1 for laboratory equipment, and IEC 60601-1 for medical equipment.)
Furthermore all configurations shall comply with the system standard IEC
Caution! 1. Do not replace battery yourself. Please contact a qualified technician
or your retail.
2.The computer is provided with a battery-powered real-time clock cir-
cuit. There is a danger of explosion if battery is incorrectly replaced.
Replace only with same or equivalent type recommended by the manu-
facture. Discard used batteries according to the manufacturer's instruc-
tions