User`s manual

ManualsBrandsAdvantech ManualsComputer equipmentPPC-150

131

132

133

134

135

136

137

138

139

140

116

PPC-150 User's Manual

Reset Configuration DataReset Configuration Data

Reset Configuration Data

When enabled, this feature allows the system to clear the last BIOS configu-

ration data and then reset the data with the default BIOS

configuration data.

The options are: Disabled (Default), Enabled.

PCI IRQ Activated ByPCI IRQ Activated By

PCI IRQ Activated By

If your IDE card is triggered by edge, set it at "Edge".

The options are: Level (Default), Edge.

PCI IDE 2nd ChannelPCI IDE 2nd Channel

PCI IDE 2nd Channel

This item allows you to designate an IDE controller board inserted into one

of the PCI slots as your secondary IDE controller.

The options are: Enabled (Default), Disabled.

PCI IDE IRQ Map TPCI IDE IRQ Map T

PCI IDE IRQ Map T

This item allows you to configure your system to the type of IDE disk

controller that you are using. By default, Setup assumes that your controller

is a PCI device rather than an ISA controller. The more

apparent difference is the type of slot being used.

Your system is equipped with a PCI controller. Selecting PCI-AUTO allows

you to specify which slot has the controller and which PCI interrupt (A, B, C

or D) is associated with the connected hard drives.

The options are: PCI-AUTO (Default), ISA.

Primary IDE INT#Primary IDE INT#

Primary IDE INT#

Remember that this setting refers to the hard disk drive itself, rather than

individual partitions.

Secondary IDE INT#Secondary IDE INT#

Secondary IDE INT#

Since each IDE controller supports two separate hard drives, you can select

the INT# for each. You will note that the primary has a lower interrupt than

the secondary.

Selecting PCI-AUTO allows the system to automatically determine how your

IDE disk system is configured.