User`s manual

120 PPC-150 User's Manual
WDT Active When Power ONWDT Active When Power ON
WDT Active When Power ONWDT Active When Power ON
WDT Active When Power ON
This is Advantech's patented watchdog function which can reboot the system
should the computer hang in the BIOS checkup.
The options are: 63 sec (Default), Disabled, 31 sec, 15 sec.
OnboarOnboar
OnboarOnboar
Onboar
d Serial Ports 1 & 2d Serial Ports 1 & 2
d Serial Ports 1 & 2d Serial Ports 1 & 2
d Serial Ports 1 & 2
If the serial ports use the onboard I/O controller, you can modify your serial
port parameters.
The options for Port 1 are: 3F8/IRQ4 (Default), 2E8/IRQ3, Disabled,
2F8/IRQ3, 3E8/IRQ4.
The options for Port 2 are: 2F8/IRQ3 (Default), 3E8/IRQ4, 2E8/IRQ3,
Disabled, 3F8/IRQ4.
IR AddrIR Addr
IR AddrIR Addr
IR Addr
ess Selectess Select
ess Selectess Select
ess Select
When enabled, the infrared receptor is activated.
The options are: Disabled (Default), Enabled.
OnboarOnboar
OnboarOnboar
Onboar
d Serial Ports 3 & 4d Serial Ports 3 & 4
d Serial Ports 3 & 4d Serial Ports 3 & 4
d Serial Ports 3 & 4
If the serial ports use the onboard I/O controller, you can modify your serial
port parameters.
The options for Port 3 are: 3E8/IRQ10 (Default), 2E8/IRQ5, Disabled.
The options for Port 4 are: 2E8/IRQ5 (Default), Disabled, 3E8/IRQ10.
OnboarOnboar
OnboarOnboar
Onboar
d Parallel Portd Parallel Port
d Parallel Portd Parallel Port
d Parallel Port
If the parallel port uses the onboard I/O controller, you can modify your
parallel port paramaters. When you select "Disabled", the next two setup
items will disappear.
The options are: 378/IRQ7 (Default), 3BC/IRQ7, 278/IRQ5, Disabled.
Parallel Port ModeParallel Port Mode
Parallel Port ModeParallel Port Mode
Parallel Port Mode
You can choose different data transfer modes for your system.
The options are: ECP & EPP (Default), SPP, EPP, ECP.