User`s manual

152 PPC-150 User’s Manual
If you want to completely disassemble the panel PC, follow the step-by-step
procedures below. Users should be aware that Advantech Co., Ltd. takes no
responsibility whatsoever for any problems or damage caused by the user
disassembly of the panel PC. Make sure the power cord of the panel PC is
unplugged before you start disassembly.
The following procedures do not include the detailed disassembly procedures
for the CPU, HDD, CD-ROM drive, FDD, and SRAM; all of which can be
found in Chapter 4.
1. Unscrew the seven screws on the rear cover, and remove it. The PCI/ISA
expansion slot cover can be detached by removing the two additional
screws.
2. Remove the side panel by pushing it outward.
3. Unscrew the four screws that attach the CPU cover.
4. Detach the flat cable of the HDD, FDD and CD-ROM drive. Remove the
two screws on the PCI/ISA bus expansion card. Remove the ten screws
on the side rim of the shielding case. Carefully move the shielding case to
the right to bypass the eject buttons of the PCMCIA slot, before removing
the case from the machine.