User`s manual

18 PPC-150 User's Manual
STEP 2: Align the soldered pins and their cables with the corre-
sponding polarization marks on the front part of the male insulator
(+ / G / -). Now plug the pins separately into the holes of the male
insulator. Pin 1 should go into the positive DC power input ( + ),
pin 2 connects to the frame ground ( G ), and pin 3 should be
plugged into the negative DC power input ( - ).
Bottom tray
STEP 3: Mount the front part of the male insulator onto the bottom tray.
Female insulator
+
G
⁄@
Male insulator