User`s manual

PPC-123 User's Manual

PM Control by APM

The option "No" allows the BIOS to ignore the APM (Advanced

Power Management) specification. Selecting "Yes" will allow the BIOS

to wait for APM's prompt before it enters Doze mode, Standby mode,

or Suspend mode. If the APM is installed, it will prompt the BIOS to

set the system into power saving mode after all tasks are done.

The options are: Yes (Default), No.

Video Off Option

This feature provides the selections for the video display power

saving mode. The option "Susp, Stby → Off" allows the video display

to go blank if the system enters Suspend or Standby mode. The option

"Suspend → Off" allows the video display to go blank if the system

enters Suspend mode. The option "All Modes → Off" allows the

video display to go blank if the system enters Doze mode or Suspend

mode. The option "Always On" allows the video display to stay in

Standby mode even when the system enters Doze or Suspend mode.

The options are: Susp, Stby → Off (Default), Suspend → Off,

All Modes → Off, Always On.

Video Off Method

"DPMS Supported" allows the BIOS to blank off the screen display

with your VGA card which supports DPMS (Display Power Manage-

ment Signaling function). "Blank Screen" allows the BIOS to blank the

screen display by turning off the red-green-blue signals.

The options are: DPMS Supported (Default), Blank Screen.

MODEM Use IRQ

This feature allows you to select the IRQ# to meet your modem's IRQ#.

The options are: 3 (Default), 4, 5, 7, 9, 10, 11, NA.

Doze Mode

The system will not enter Doze mode, because this option is designat-

ed as "Disabled".