User`s manual

Chapter 9 Award BIOS Setup

The options are: Disabled (Default), Enabled.

Used MEM base addr

Choose and use the MEM base address.

The options are: N/A (Default), C800 ~ DC00.

Assign IRQ for USB

Assigns an IRQ for the USB.

The options are: Disabled (Default), Enabled.

9.8 Load BIOS Defaults

Figure 9-7: Load BIOS defaults screen

The BIOS defaults screen contains the most appropriate values of the

system parameters that allow minimum system performance.

9.9 Load Setup Defaults

Selecting this field loads the factory defaults for BIOS and Chipset

Features. The system will automatically detect these defaults.