User`s manual

PPC-123 User's Manual

9. Connect the FDD cable (26-pin to 26-pin) and CD-ROM cable

(40-pin to 40-pin). The other end of the FDD cable is connected

to connector CN10 on the PC board. The other end of the

CD-ROM cable is connected to connector CN18 on the PC board.

10. Slide the FDD assembly and slim CD-ROM assembly toward the

inside of the panel PC, as far as they will go.

11. Secure the two screws ("A") of the metal plate to the shielding

case.

Figure 4-5: Installing the FDD and slim CD-ROM drive

Metal plate

3.5" floppy drive