User manual

PPC-S155T User Manual 26
5.1 Introduction
The PPC-S155T uses the combination of Intel 915GME north bridge and Intel
82801FBM ICH6 Mobile chipsets.
The Mobile Intel® 915GME Chipset is an optimized integrated graphics solution with
a 400 MHz and 533 MHz front-side bus. The integrated 32-bit 3D graphics engine,
based on Intel® Graphics Media Accelerator 900 (Intel® GMA 900) architecture,
operates at core speeds of up to 333 MHz. It features a low-power design, is vali-
dated with the Intel® Pentium® M and Intel® Celeron® M processors on 90nm pro-
cess, and supports up to 2 GB of DDR2 533 MHz system memory.
The Intel 915GME GMCH and ICH6-M are part of Intel's comprehensive validation
process that enables fast deployment of next-generation platforms to maximize com-
petitive advantage while minimizing development risks.
5.1.1 Installation INF driver for Windows 98/2000/XP
1. Path: D:\PPC-S155T\Chipset Software\INF Drivers\4.30 1006\infinst_auto.ex
2. Press “Next” to proceed, then press “Finish”.
3. Choose “Yes, I want to restart my computer”, and press “Finish”, the system will
reboot automatically.
5.1.2 Installation IAA driver for Windows 98/2000/XP
1. Path: D:\PPC-S155T\Chipset Software\IAA Drivers\2.3\iaa23_multi
2. Press “Next“ to proceed, and press “Finish”.
3. Choose “Yes, I want to restart my computer”, and press “Finish”, the system will
reboot automatically.
5.2 Further Information
Intel website: www.intel.com
Advantech websites: www.advantech.com
www.advantech.com.tw
Note! The following are examples only. It is important to follow the instructions
and pay attention to the instructions which appear on the screen
The CD-ROM drive is designated as “D” throughout this chapter.