User manual

PWS-770 User Manual 28
5.3.1 Setting Up 3G Module
1. Tap PWS-770 driver > 3G_PH8 > PH8 Connection Manager > bin to run the
connectionmanager software.
2. On Select Device, select Cinterion PH8 HSPA Wireless Ethernet Adapter.
3. Check APN Name, then enter the access point name of your network service
provider on the space. In this case, “internet” is the AP name.
4. Tap Connect.
5. When connected, signal strength is shown on the lower left corner of the Con-
nection Manager window.
Note! To avoid damage to the SIM card, insert the SIM card before you turn
the power on and remove the SIM card after you turn the power off.
Preliminary