User`s manual

RS-100-SF User’s Manual
22
2.6 System Installation___________________
2.6.1 Installing Memory
The SMB-2501 contains three sockets for 184-pin dual
inline memory modules (DIMMs). All these sockets accept
un-buffered DDR266 SDRAMs. The un-buffered DDR266
DIMMs are available in 128, 256, 512 and 1024 MB. The
sockets can be filled in any combination with DDR DIMMs
of any size, allowing the SMB-2501 up to 3 GB of memory.
2.6.2 Memory Installation Procedures
To install DDR DIMMs, first make sure the two handles of
the DDR DIMM socket are in the "open" position. i.e. The
handles lean outward. Slowly slide the DDR DIMM module
along the plastic guides on both ends of the socket. Then
press the DDR DIMM module right down into the socket,
until you hear a click. This is when the two handles have
automatically locked the memory module into the correct
position of the DDR DIMM socket. To remove the memory
module, just push both handles outward, and the memory
module will be ejected by the mechanism in the socket.