Technical information

2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10
2/182/18
Presentation
Modicon M340 automation
platform
0
Analog I/O modules
Presentation
The Modicon M340 analog I/O module offer comprises:
5 analog input modules:
2 modules with 4 and 8 isolated channels, low-level voltage, thermocouples, Pt,
JPt, Ni or Cu temperature probes and resistors, 15 bits + sign BMX ART 0414/0814
1 module with 4 high-speed isolated analog channels, high-level voltage or
current, 16 bits BMX AMI 0410
2 modules with 8 high-speed non-isolated analog channels, high-level voltage or
current, 15 bits + sign BMX AMI 0800/0810
3 analog output modules:
1 module with 2 isolated analog channels, high-level voltage or current, 15 bits +
sign BMX AMO 0210
1 module with 4 isolated analog channels, high-level voltage or current, 15 bits +
sign BMX AMO 0410
1 module with 8 non-isolated analog channels, high-level current, 15 bits + sign
BMX AMO 0802
1 mixed analog I/O module with 4 input channels and 2 output channels
(non-isolated), voltage or current, 12 to 14 bits according to type of channel and
range BMX AMM 0600
Analog I/O modules are equipped with a connector for a 20 or 28-way removable
terminal block, except for BMX ART 0414/0814 analog input modules for
thermocouples/temperature probes, which are equipped with one or two 40-way
connector(s).
All analog modules occupy a single slot in BMX XBP ppp racks. These modules can
be installed in any slot in the rack, except the first two (PS and 00) which are
reserved for the power supply module in the BMX CPSpp0 rack and the
BMX P34pp0 processor module respectively.
The power supply for the analog functions is supplied by the backplane bus (3.3 V
and 24 V). Analog I/O modules are hot-swappable (see page 2/10).
b
v
v
v
b
v
v
v
b
Processors:
page 1/2
Communication:
page 3/2
Software:
page 4/2
Ruggedized Modicon M340 modules:
page 6/2