Technical information

2
1
3
4
5
6
7
8
9
10
2
1
3
4
5
6
7
8
9
10
2/322/32
Presentation,
description
Modicon M340 automation
platform
BMX MSP 0200 motion control module
Presentation
The 1 BMX MSP 0200 motion control pulse train output (PTO) module for the
Modicon M340 automation platform is used for controlling third-party variable speed
drives
2 which have an integrated position loop and inputs that are compatible with
open collector outputs.
The BMX MSP 0200 control module is also directly compatible with the Lexium 32C
and 32M
3 servo drive ranges, which have an integrated pulse control interface.
The BMX MSP 0200 motion control PTO module has two independent PTO
channels. Like any other application-specific module, it is installed in the rack slots
(labelled 01 to 11). The number of modules is limited by the maximum number of
application-specific channels permitted according to the CPU type:
Standard BMX P34 1000: Maximum of 20 application-specific channels (1)
Performance BMX P34 20p0: Maximum of 36 application-specific channels (1)
Description
The BMX MSP 0200 motion control module is standard format (1 slot). Its housing
provides IP 20 protection of the electronics and it is locked in each slot (01 to 11) by a
captive screw.
The front panel of the BMX MSP 0200 motion control module features:
4 A rigid body providing support and protection for the electronic card
5 A module reference marking (a label is also visible on the right-hand side of the
module)
6 A display block indicating:
Module status, 4 LEDs (RUN, ERR, I/O and DL)
Status of the auxiliary inputs, 4 per channel
Status of the PTO outputs, 2 per channel
Status of the auxiliary outputs, 2 per channel
7 A connector for a 28-way terminal block, for connecting to a removable spring
terminal block on sensors and preactuators
To be ordered separately:
8 A 28-way removable spring terminal block BMX FTB 2820, supplied with a
channel identification label
A shielding connection kit to protect against electrostatic discharge, consisting of
a metal bar and two sub-bases for mounting on the rack: BMX XSP pp00 (reference
dependent on the number of slots in the rack) (see page 1/11)
A set of clamping rings STB XSP 30p0 for the connection cable shielding braids
(reference dependent on the cable Ø) (see page 1/11)
(1) Application-specific channels: BMX EHC 0200 (2-channel) and BMX EHC 0800
(8-channel) counter modules, BMX MSP 0200 (2-channel) motion control module and
BMX NOM 0200 (2-channel) and BMX NOR 0200H (1-channel) serial communication modules
b
b
v
v
v
v
b
b
4
5
6
7
8
4
5
6
7
8
BMX MSP 0200 BMX FTB 2820
Processors:
page 1/2
Communication:
page 3/2
Software:
page 4/2
Ruggedized Modicon M340 modules:
page 6/2
Servo motors
1
2
3