Product Data Sheet

EXTREME HOLDING POWER,
FOR THE FLAT OUT BEST
™
ADVANTECH
®
SUBFLOORS
MORE COVERAGE IN EACH CAN
8x greater yield than traditional adhesive caulks
4
means advanced strength with less
product — a cost-effective, speedy application for your suboor installations.
IDEAL FOR COLD AND WET CONDITIONS
Formulated to adhere to wet and frozen structural suboor panels and joists,
3
this moisture
curing poly adhesive is the ideal solution for not so ideal weather conditions.
8X
COVERAGE
4
MORE
POLYURETHANE BONDING STRENGTH
Polyurethane formula helps create a solid, rmly-bonded surface — exceeding ASTM
D3498 and APA-AFG-01 suboor adhesive standards. Floors stay put, and quiet, helping
reduce the chance of callbacks. When tested to ASTM requirements, AdvanTech
™
suboor
adhesive consistently performs 2 to 5 times above standards.
FILLS GAPS FOR A TIGHTER BOND
The foam to gel polyurethane formula expands into minor gaps between the subooring panel
and joist, maximizing adhesion for a tighter overall subooring assembly.
20° F
105° F
Versatile Application Strength
ASTM D3498 Pass Criteria
Shear Strength — Dry Lumber > 500 psi (requirement >150)
Shear Strength — Wet Lumber
> 300 psi — Douglas Fir (req > 150)
> 400 psi — Southern Pine (req > 150)
Shear Strength — Frozen Lumber
> 300 psi — Douglas Fir (req > 100)
> 500 psi — Southern Pine (req > 100)
Moisture Resistance > 500 psi (req > 150)
Gap > 400 psi (req > 100)
Oxidation Resistance Pass
Technical Data
Shelf Life 18 months
Open Time 20 minutes
Fully Cured 24 hours
Yield at 1/2" bead size
4
400 linear feet
Appl. Temperature Range 20° – 105°F
VOC Content 15 wt. %
VOC Content (California) 155 g/L
VOC Compliant
5
Yes
EXPANDS INTO
IRREGULARITIES
1. Squeak Free Guarantee for AdvanTech subfloor assembly at joist connection: Limitations and restrictions
apply. Must use AdvanTech subfloor panels with I-joists or trusses and deformed fasteners with this adhesive.
Not applicable over dimensional lumber framing or with other subfloor panels. Applies only to one and
two family dwellings, townhomes and structures permitted under IRC or governing residential code. See
SqueakFreeGuarantee.com for complete details.
2. Builder Magazine 2002-2016 Brand Use Studies; #1 in OSB category.
3. Exceeds ASTM D3498 Standard Specification for Field-Gluing Plywood to Lumber Framing for Floor Systems,
dry, wet, frozen, and gap filling adhesion tests.
4. Coverage: One 24 oz. can of AdvanTech subfloor adhesive yields approximately 400 linear feet of gel adhesive at
½" bead compared to applying a 28 oz. cartridge adhesive at 3/8" bead. Coverage will vary based on bead
size and weather conditions.
5. California Air Research Board, CARB, has classified AdvanTech Subfloor Adhesive as a Web Spray Adhesive.
AdvanTech Subfloor Adhesive satisfies governing VOC limitations for web spray adhesives.
© 2015-2017 Huber Engineered Woods LLC. AdvanTech is a registered trademark and FLAT OUT BEST is a trademark of Huber Engineered Woods LLC. HUB 8301 REV 1/17
Watch the easy application in action and see the heavy-duty holding power difference.
Visit AdvanTechSFA.com