User`s manual

SMB-2501 User’s Manual
60
3.2.6 PnP/ PCI Configurations
Reset Configuration Data [Disabled/Enabled]: Default is
“Disabled”. Select “Enabled” to reset Extended System
Configuration Data (ESCD) when you exit Setup if you
have installed a new add-on and the system reconfiguration
has caused such a serious conflict that the OS cannot boot.
Resources Controlled by [Auto/Manual]: BIOS can
automatically configure all the boot and plug & play
compatible devices. If you choose “Auto”, you cannot select
IRQ, DMA and memory base address fields, since BIOS
automatically assigns them.