User manual
Table Of Contents
- Chapter 1 Overview
- Chapter 2 Hardware Functionality
- 2.1 Introduction
- 2.2 RS-232/422/485 Interface (COM1~COM2)
- 2.3 Optional RS-232 Interfaces (COM3~COM4)
- 2.4 LAN: Ethernet Connector
- 2.5 Power Inputs
- 2.6 USB Connector
- 2.7 DVI-I Display Connector
- 2.8 Reset Button
- 2.9 Power Button
- 2.10 Audio
- Chapter 3 Initial Setup
- Appendix A System Settings and Pin Assignments
- A.1 System I/O Address and Interrupt Assignments
- A.2 Board Connectors and Jumpers
- A.3 RS-232 Standard Serial Port (COM3~COM4)
- A.4 RS-232/422/485 Serial Port (COM1~COM2)
- A.5 Ethernet RJ-45 Connector (LAN1~LAN2)
- A.7 PS/2 Keyboard and Mouse Connector
- A.8 USB Connector (USB1~USB4 & CN7)
- A.9 VGA Display Connector
- Appendix B Programming the Watchdog Timer
UNO-3072LA User Manual 18
Note: 1. UNO-3072LA also support 16:9 widescreen.
2. While using Microsoft Windows, if plug-n-play didn't work properly
and cause no image on the monitor, please try hot key "CTRL+ALT+F1"
for VGA output and "CTRL+ALT+F4" for DVI in order to manually
switch video output.
2.7.2 Multiple Video Output Option
UNO-3072LA provides two DVI-I connectors, which can let user have
multiple video output configuration as follow:
Single Display:
Single DVI Monitor:Connect DVI cable to the DVI-I connector
Note: Display default setting is on VGA. While using DVI display only, be
sure to close jumper on CN39.
Single VGA Monitor: Link the DVI-I to DVI and VGA Y-cable (Advan-
tech P/N: 1700004713) or through DVI to VGA converter connector
(Advantech P/N: 1654000446)