User Manual SOM-5894
Copyright The documentation and the software included with this product are copyrighted 2013 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Declaration of Conformity CE This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly recommend the use of CE-compliant industrial enclosure products.
Warnings, Cautions and Notes Warning! Warnings indicate conditions, which if not observed, can cause personal injury! Caution! Cautions are included to help you avoid damaging hardware or losing data. e.g. There is a danger of a new battery exploding if it is incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the manufacturer. Discard used batteries according to the manufacturer's instructions.
Safety Instructions 1. 2. 3. Read these safety instructions carefully. Keep this User Manual for later reference. Disconnect this equipment from any AC outlet before cleaning. Use a damp cloth. Do not use liquid or spray detergents for cleaning. 4. For plug-in equipment, the power outlet socket must be located near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation.
Safety Precaution - Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage. To avoid electrical shock, always disconnect the power from your PC chassis before you work on it. Don't touch any components on the CPU card or other cards while the PC is on. Disconnect power before making any configuration changes. The sudden rush of power as you connect a jumper or install a card may damage sensitive electronic components.
Contents Chapter Chapter 1 General Information ............................1 1.1 1.2 1.3 Introduction ............................................................................................... 2 Specifications ............................................................................................ 2 1.2.1 Board Information ......................................................................... 2 1.2.2 System Information .......................................................................
A.1 SOM-5894 Type 6 Pin Assignment......................................................... 22 Appendix B Watchdog Timer................................ 27 B.1 Programming the Watchdog Timer ......................................................... 28 Appendix C Programming GPIO........................... 29 C.1 GPIO Register......................................................................................... 30 Appendix D System Assignments........................ 31 D.1 System I/O Ports..
Chapter 1 1 General Information This chapter gives background information on the SOM-5894 CPU Computer on Module.
1.1 Introduction SOM-5894 is a COM-Express Basic module with pin-out Type 6 that fully complies with the PICMG (PCI Industrial Computer Manufactures Group) COM.0 R2.1 specification. The CPU module incorporates an Intel 4th Generation Core i processor, PCH QM87, and other peripheral chips. The Intel latest processor uses 22nm and 3D Trigate transistor technologies that brings 13% performance improvement over previous versions, and integrates a powerful Intel HD Graphic 4600 as well as DX11.1, OpenCL1.
Graphic Core: Intel® HD Graphic 4600 supports DX11.1, OGL4.0, OCL1.2, and MPEG2, AVC/H.264, VC-1 HW decode/encode/transcode acceleration Graphics Core Base Freq. Max Freq.
Audio Interface: Intel HD Audio interface LPC Bus SMBus I2C Bus: 100 KHz (up to 400 KHz with BIOS modification. Please contact Advantech sales or FAE for more details) SPI: Supports SPI BIOS only 1.2.5 I/O Ethernet: Intel I217LM Gigabit LAN supports 10/100/1000 Mbps Speed SATA: Supports 4 ports SATA Gen3 (6 Gb/s) USB Interface: Supports 4 ports USB3.0, 8 ports USB 2.
Chapter 1 1.3 Functional Block Diagram Two 204pin SODIMM Dual Channel DDR3L 1333/1600MHz up to 16GB A1:non-ECC, B1: ECC VR12.5 Intel Core i7/i5/i3 DDI1 HDMI/DVI/DisplayPort eDP DDI2 HDMI/DVI/DisplayPort DDI3 HDMI/DVI/DisplayPort Chrontel CH7511 Dual Channel LVDS eDP (Optional) FDI DMI 8 USB 2.0 6 PCIe x1 4 USB 3.
SOM-5894 User Manual 6
Chapter 2 2 Mechanical Information This chapter gives mechanical information on the SOM-5894 CPU Computer on Module.
2.1 Board Information The figures below indicate the main chips on SOM-5894 Computer-on-Module. Please aware of these positions while designing your own carrier board to avoid mechanical problems and thermal solutions for best heat dispassion performance. OnModule Smart Fan Connector DDR3L SODIM BIOS Socket PCH Processor Figure 2.1 Board Chips Identify - Front COM Express Connector Figure 2.
97.51 117.50 For more detail about 2D/3D models, please find on Advantech COM support service website http://com.advantech.com. 80.90 48.96 27.10 14.10 4 0 10.20 4 0 30.33 62.25 125 121 114.80 (11.4) 74.20 16.50 0 Figure 2.3 Board Mechanical Drawing - Front ø2.7 ø6.0 89 77 0 Figure 2.4 Board Mechanical Drawing - Back 9 SOM-5894 User Manual Mechanical Information 95 91 Chapter 2 2.
2.3 Assembly Drawing These figures demonstrate the assembly order from the thermal module, and the COM module to the carrier board. Figure 2.5 Assembly Drawing There are 4 reserved screw holes for SOM-5894 to be pre-assembled with the heat spreader. Figure 2.
Please consider the CPU and chip height tolerance when designing your thermal solution. 11 SOM-5894 User Manual Mechanical Information Figure 2.7 Main Chip Height and Tolerance Chapter 2 2.
SOM-5894 User Manual 12
Chapter 3 AMI BIOS Sections include: Introduction Entering Setup Hot / Operation Key Exit BIOS Setup Utility 3
3.1 Introduction With the AMI BIOS Setup program, users can modify BIOS settings and control various system features. This chapter describes the basic navigation of the BIOS Setup Utility. Figure 3.1 BIOS Setup Utility Main Screen AMI's BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This information is stored in battery-backed CMOS so it retains the Setup information when the power is turned off.
Turn on the computer and then press or to enter Setup menu. 3.3 Hot / Operation key When users first enter the BIOS Setup Utility, users will enter the Main setup screen. Users can always hot operation key to configure item setting. AMI BIOS 3.3.1 Left / Right Key Use these keys to switch sub-page or tab. 3.3.2 ESC key Use this key to return previous page or exit this page. 3.3.3 Enter Key Use this key to enter sub-page or change this item options. 3.3.
SOM-5894 User Manual 16
Chapter 4 4 S/W Introduction & Installation Sections include: S/W Introduction Driver Installation Advantech iManager
4.1 S/W Introduction The mission of Advantech Embedded Software Services is to "Enhance quality of life with Advantech platforms and Microsoft Windows embedded technology." We enable Windows Embedded software products on Advantech platforms to more effectively support the embedded computing community. Customers are freed from the hassle of dealing with multiple vendors (Hardware suppliers, System integrators, Embedded OS distributor) for projects.
19 SOM-5894 User Manual S/W Introduction & Installation Advantech's platforms come equipped with iManager, a micro controller that provides embedded features for system integrators. Embedded features have been moved from the OS/BIOS level to the board level, to increase reliability and simplify integration.
SOM-5894 User Manual 20
Appendix A A Pin Assignment This appendix gives you the information about the hardware pin assignment of the SOM-5894 CPU System on Module.
A.1 SOM-5894 Type 6 Pin Assignment This section gives SOM-5894 pin assignment on COM Express connector which compliant with COMR.0 R2.1 Type 6 pin-out definitions. More details about how to use these pins and get design reference, please contact to Advantech for design guide, checklist, reference schematic, and other hardware/software supports.
GND B41 GND A42 USB2- B42 USB3- A43 USB2+ B43 USB3+ A44 USB_2_3_OC# B44 USB_0_1_OC# A45 USB0- B45 USB1- A46 USB0+ B46 USB1+ A47 VCC_RTC B47 EXCD1_PERST# A48 EXCD0_PERST# B48 EXCD1_CPPE# A49 EXCD0_CPPE# B49 SYS_RESET# A50 LPC_SERIRQ B50 CB_RESET# A51 GND B51 GND A52 PCIE_TX5+ B52 PCIE_RX5+ A53 PCIE_TX5- B53 PCIE_RX5- A54 GPI0 B54 GPO1 A55 PCIE_TX4+ B55 PCIE_RX4+ A56 PCIE_TX4- B56 PCIE_RX4- A57 GND B57 GPO2 A58 PCIE_TX3+ B58 PCIE_RX3+ A59
A89 PCIE0_CK_REF- B89 VGA_RED A90 GND B90 GND A91 SPI_POWER B91 VGA_GRN A92 SPI_MISO B92 VGA_BLU A93 GPO0 B93 VGA_HSYNC A94 SPI_CLK B94 VGA_VSYNC A95 SPI_MOSI B95 VGA_I2C_CK A96 PP_TPM B96 VGA_I2C_DAT A97 TYPE10# B97 SPI_CS# A98 RS1_TX B98 RSVD A99 RS1_RX B99 RSVD A100 GND B100 GND A101 RS2_TX B101 FAN_PWMOUT A102 RS2_RX B102 FAN_TACHIN A103 LID# B103 SLEEP# A104 VCC_12V B104 VCC_12V A105 VCC_12V B105 VCC_12V A106 VCC_12V B106 VCC_12V A
N/A D25 RSVD C26 N/A D26 DDI1_PAIR0+ C27 RSVD D27 DDI1_PAIR0- C28 RSVD D28 RSVD C29 DDI1_PAIR5+ D29 DDI1_PAIR1+ C30 DDI1_PAIR5- D30 DDI1_PAIR1- C31 GND D31 GND C32 DDI2_CTRLCLK_AUX+ D32 DDI1_PAIR2+ C33 DDI2_CTRLDATA_AUX- D33 DDI1_PAIR2- C34 DDI2_DDC_AUX_SEL D34 DDI1_DDC_AUX_SEL C35 RSVD D35 RSVD C36 DDI3_CTRLCLK_AUX+ D36 DDI1_PAIR3+ C37 DDI3_CTRLDATA_AUX- D37 DDI1_PAIR3- C38 DDI3_DDC_AUX_SEL D38 RSVD C39 DDI3_PAIR0+ D39 DDI2_PAIR0+ C40 DDI3_PAIR0-
C73 GND D73 GND C74 PEG_RX7+ D74 PEG_TX7+ C75 PEG_RX7- D75 PEG_TX7- C76 GND D76 GND C77 RSVD D77 RSVD C78 PEG_RX8+ D78 PEG_TX8+ C79 PEG_RX8- D79 PEG_TX8- C80 GND D80 GND C81 PEG_RX9+ D81 PEG_TX9+ C82 PEG_RX9- D82 PEG_TX9- C83 RSVD D83 RSVD C84 GND D84 GND C85 PEG_RX10+ D85 PEG_TX10+ C86 PEG_RX10- D86 PEG_TX10- C87 GND D87 GND C88 PEG_RX11+ D88 PEG_TX11+ C89 PEG_RX11- D89 PEG_TX11- C90 GND D90 GND C91 PEG_RX12+ D91 PEG_TX12+ C92 PEG
Appendix B B Watchdog Timer This appendix gives you the information about the watchdog timer programming on the SOM-5894 CPU System on Module.
B.1 Programming the Watchdog Timer Trigger Event Note IRQ IRQ5, 7, 14 (BIOS setting default disable)** NMI N/A SCI Power button event Power Off Support H/W Restart Support WDT Pin Activate Support ** WDT new driver support automatically select available IRQ number from BIOS, and then set to EC. Only Win XP, Win7 and Win8 support it. In other OS, it will still use IRQ number from BIOS setting as usual.
Appendix C C Programming GPIO This Appendix gives the illustration of the General Purpose Input and Output pin setting.
C.1 GPIO Register GPIO Byte Mapping H/W Pin Name BIT0 GPO0 BIT1 GPO1 BIT2 GPO2 BIT3 GPO3 BIT4 GPI0 BIT5 GPI1 BIT6 GPI2 BIT7 GPI3 For details, please refer to iManager & Software API User Manual.
Appendix D D System Assignments This appendix gives you the information about the system resource allocation on the SOM-5894 CPU System on Module.
D.1 System I/O Ports Table D.1: System I/O Ports Addr.
Appendix D System Assignments F060-F07F F080-F08F F090-F09F F0A0-F0A3 F0B0-F0B7 F0C0-F0C3 F0D0-F0D7 F0E0-F0EF F0F0-F0FF F100-F103 F110-F117 F120-F123 F130-F137 FFFF-FFFF Ethernet Controller Standard Dual Channel PCI IDE Controller Standard Dual Channel PCI IDE Controller Standard Dual Channel PCI IDE Controller Standard Dual Channel PCI IDE Controller Standard Dual Channel PCI IDE Controller Standard Dual Channel PCI IDE Controller Standard Dual Channel PCI IDE Controller Standard Dual Channel PCI IDE Con
D.4 1st MB Memory Map Table D.4: 1st MB Memory Map Addr.
Appendix D System Assignments SOM-5894 User Manual 35
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
