User manual

43 Chapter 4
Figure 4.36: Explore the TPC
4.2.3 Network via USB Client Port
In addition to connecting via a null modem cable as depicted in section
4.2.3, TPC-66/68 panel computers can also be connected to the host com-
puter via the client’s USB port. The host computer must install the
Microsoft ActiveSync service offered by Microsoft. Then use the USB
client to USB host cable and connect the USB client port of the panel
computer and the USB host port of the host computer. Be sure that the PC
connection setting of the panel computer is “USB Socket Default” as
shown in the Figure 4.27. This is also the default setting of TPC-66/68.
Then the above steps will make the panel computer try to connect with
the host automatically.